 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SBH92344x FSAN BIDITM Transceiver Optical Module for ATM-PON OLT Applications, 1550 nm Emitting-/1300 nm Receiving Function, High Power DFB-Laser, InGaAs/InP-PIN Photodiode with Burst Mode Transimpedance Amplifier * Designed for applications in passive-optical networks according FSAN, ITU-G.983 * Suitable for OLT applications, 155 Mbit/s and 622 Mbit/s downstream bitrate, Class B and Class C * Uncooled 1550 nm DFB Laser Diode with MultiQuantum Well structure * Ternary Moniordiode at rear laser mirror for monitoring and control of radiant power * Integrated Wavelength Division Multiplexer * InGaAs/InP-PIN-photodiode with 1550 nm blocking filter and integrated 155 Mbit/s transimpedance amplifier for burst mode applications * Hermetically sealed subcomponents, similar to TO 18 * With singlemode fiber pigtail Maximum Ratings Output power ratings refer to the optical port. The operating temperature of the submount is identical to the case temperature Module Operating temperature range at case Storage temperature range Soldering temperature tmax = 10 s, 2 mm distance from bottom edge of case Symbol Value - 20 ... + 70 - 40 ... + 85 260 Unit C C C TC Tstg TS Laser Diode Direct forward current Radiant power CW Reverse Voltage Symbol Value 120 4 2 Unit mA mW V IF max Popt max VR max page(1/5) Siemens Semiconductors 1998-08-21 SBH92344x FSAN Monitor Diode Reverse Voltage Forward Current Symbol Value 10 2 Unit V mA VR max IF max PIN Photodiode with Preamplifier Maximum Voltage Maximum optical power (average) Symbol Value 12 1 Unit V mW VCC max Pport max Characteristics All optical data refer to the optical port at - 20 to + 70 C Package-Temperature. Laser Diode Optical output power (average) Optical output power (peak) Emission wavelength center of range (Popt = 1 mW) Side mode suppression ratio (Popt = 1 mW) Threshold current Forward voltage (Popt = 1 mW) Radiant power at Ith Slope efficiency Variation of 1st derivative of P/I (0.1 to 2.0 mW) Differential series resistance (Popt = 1 mW) Rise and fall time (10% - 90%) Temperature coefficient of wavelength Symbol Min 1 2 1480 - 2 - - 35 - 30 - - - Max - - 1580 30 55 1.5 50 150 30 8 0.5 0.1 Unit mW mW nm dB mA V W mW/A % ns nm/K Popt av Popt peak SMSR Ith VF Pth S dP/dI rS tr, tf TC Siemens Semiconductors page(2/5) 1998-08-21 SBH92344x FSAN Monitor-Diode Dark current, VR = 5 V, Popt = 0 Photocurrent, Popt = 1 mW Capacitance, VR = 5V, f = 1MHz Tracking error, VR = 5 V (see note 1) Symbol Min - 100 - -1 Max 0.5 1000 10 1 Unit A A pF dB IR IP C5 TE PIN Photodiode with Preamplifier Supply Voltage Supply Current Optical Sesitivity (BER 10 ) Linear Bandwidth (- 3dB) Optical Overload (average) Transimpedance (differential) Gain (differential) -10 Symbol Min 4.5 - - 33 180 -8 16 10 Max 6 26 - - - 24 24 Unit V mA dBm MHz dBm k mV/W VCC ICC S BW Pmax RT G Module Optical Crosstalk (see note 2) Backreflection (Return Loss) @ in = 1310 nm Symbol CRT - Value < - 47 < - 20 Unit dB dB Note 1: The tracking error TE is the variation rate of Popt at constant current Imon over a specified temperature range and relative to the reference point: Imon,ref = Imon(T = 25 C, Popt = 1 mW). Thus, TE is given by: TE [dB ] = 10 x log Popt[Tc ]- Popt [25C ] Popt [25C ] Siemens Semiconductors page(3/5) 1998-08-21 SBH92344x FSAN Note 2: Optical Crosstalk is defined as CRT = 10 x log(P2/P1) with: P1 = Popt = 1 mW with no optical input power Pport and P2 the necessary optical input power Pport at = 1300 nm to get for Popt = 0 the same receiver signal level as before. Accompanying Information T = 25 C: T = 70 C: Threshold current, slope eficiency, monitor current for 1 mW output power, peak wavelength for 1 mW output power. Threshold current, slope efficiency Pigtail Fiber Pigtail, Single Mode, Silica Mode field diameter Cladding diameter Mode field/cladding concentricity error Cladding non-circularity Mode field non-circularity Cut-off wavelength Jacket diameter Bending radius Tensile strength fiber/case Length Min 8 123 - - - 1250 0.8 30 5 0.8 Max 10 127 1 2 6 - 1.0 - - 1.2 Unit m m m % % nm mm mm N m Connector all standard connectors like FC/PC, SC, SC APC, available Siemens Semiconductors page(4/5) 1998-08-21 SBH92344x FSAN Schematic Package Outline and Pinning BIDI 4 1 4 3 2 Transmitter 1 3 2 Receiver Pigtail Transmitter 1 LK 2 Case 3 MK, LA 4 MA Receiver 1 Out 2 Gnd, Case 3 Out + 4 VCC Siemens Semiconductors page(5/5) 1998-08-21 |
Price & Availability of SBH92344XFSAN
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |